An Article Takes You To Quickly Learn The Automatic Web Guide System
The web guide system is mainly applied to the lateral deviation control of the coil materials, which can control various reel materials on a production line. The automatic web guide system is simple to operate, easy to install and has fast response speed, strong anti-interference, high-precision web guiding.
Why Choose Automatic Web Guide System For Coil Materials
The coils are on a long and fast production line, as the speed, tensile, the nonuniform material thickness and all kinds of mechanical damage, resulting in moving and unidirectional deviation, causing the machining operation of the middle section not easy to cooperate, resulting in the loss of many materials and the difficulty of subsequent processing. The automatic web guiding system can solve these problems, which can always keep the edge postilion of the web always be neat and consistent. Web guide control can make steel, corrugated paper, textile, printing, labeling, non-woven fabric processing and other much more industries realize automated control.
A typical automatic web guide system which is a closed-loop system, includes a web guiding controller, a web guide sensor, a web guide framework, and a driver. The sensor detects the difference between the detection value of the edge or the line and the set value, and converts it into a proportional signal through the PLC controller. The driver realizes the web guide. It has three guiding methods, including edge position control, line control and center control.
![](https://www.arisewebguiding.com/wp-content/uploads/2022/03/ss.jpg)
Technical Parameters Of Automatic Web Guide System
![web guide system](https://www.arisewebguiding.com/wp-content/uploads/2022/03/1371665688858685442.jpg)
1. Support photoelectric sensor, ultrasonic sensor, CCD sensor.
2. Intelligent detection sensor parameters, no need for calibration sensors in most situations.
3. Automatic stroke measurement, not any mechanical switch needed.
4. Adopts variable PI adjustment algorithm, high precision, fast responding, with smaller error.
5. Super high response speed of 500 microseconds.
6. Analog sensor signal adopts 16-bit AD sampling.
7. Adopts the FIR digital wave filter, with strong anti-interference ability and more stable signals.
8. DC servo motor pushing the ball screw
9.Support Simplified Chinese, Traditional Chinese, English, three languages.
10. User-friendly operation, fast and easy.
11. Support MODBUS and PLC operation.
![Automatic web guide system](https://www.arisewebguiding.com/wp-content/uploads/2022/03/ss.jpg)
High-precision Automatic Web Guide System
The precision of the web guide system is defined as the position accuracy of the web just coming out of the probe. The accuracy of the web guiding system is determined by three factors, including the deviation of the invasive web, the accuracy of the web guiding system itself, the installation accuracy of the web guide machine.
The automatic web guide system is a controller of tracking edge or printed line of the working material to perform high-precision differential and swing, which is composed of large-scale industrial integrated circuits, with strong anti-interference ability, high reliability and long service life. The lateral web offset in the transmission is detected by the photoelectric sensor, and the electrical signal proportional to the offset will be sent to the controller. After power amplification, it is sent to the motor to make it rotate forward, stop or reverse and the motor shaft end is connected with a lead screw. The screw drives the roller to move the rolling roller in the rolling rail to move laterally in the offset direction, thereby reaching the purpose of the automatic web guide. The signal is being firmly measured and the high-precision of the web offset is the premise of automatic web guiding.
Wide Applications Of Automatic Web Guide System
An automatic web guide system can be widely used for various coils such as web films, non-woven fabric, woven fabrics, on a production line.
Applicable industries: printing, packaging, paper, non-woven fabric, lithium battery, rubber tire, metallurgy.
Applicable coils: wrapping materials, such as roll paper, film, metal foil, film, leather, non-woven fabric, woven fabric, etc.
Applicable equipment: print packaging, flexo printing machine, gravure printing machine, label printing machine, slitting machine, coating machine, composite machine, die cutter, blown film machine, etc.
![web guiding system](https://www.arisewebguiding.com/wp-content/uploads/2022/03/sss.jpg)
Summary
The automatic web guide system is an integrated high-tech product with a wide range of applications, It has the characteristics of fast responding speed, high accuracy, long service life and high stability. It is essential in the coil material production line of packaging, printing, building materials, pulp, cable, metal processing, non-woven fabric, corrugated paper processing, etc.